14 — Time Master II
USING THE TIME MASTER
™
II
ENTERING TIME VALUES
The
Time Master
™
II
allows the user to
enter time in several different ways. By
using the M] key to toggle between
modes, you can choose to enter time
in Decimal format (default), Auto-Entry
H:M:S mode, or Auto-Entry 24-hour
mode.
Keystroke Display
M
AUTO
0:00:00 HR MIN SEC
M
AUTO
00:00:00
M DEC 0.
Decimal Mode
In this mode entries are made for
regular or time calculations (when
defined with the time unit keys). Time
values are entered into the calculator
as they are spoken aloud, with the
largest time unit entered first.
Keystroke Display
Add the following time values in Decimal mode:
3 : 22: + 03:22:00
17m32ß 17:32. MIN SEC
= 03:39:32
423m+ 423:00 MIN SEC
38•25ß 38.25 SEC
= 423:38.25 MIN SEC
* If you are not in Decimal mode,
repeatedly press M until DEC 0. is
displayed.
To Next Page
Loading...
Need help?
General
