Calculated Industries 9130 - Duration Function Keys

User’s Guide — 5
Duration Function Keys
B Beginning Point - Used with
the E and D keys to enter
or calculate the starting point of
a time duration.
E End Point - Used with[Band
D keys to enter or calculate
the ending point of a time
duration.
C 1 (+1 day) - Plus One Day - Used
before the E key to add 24
hours to a time calculation.
C 2 (+2 day) - Plus Two Day - Used
before the E key to add 48
hours to a time calculation.
C 3 (+3 day) - Plus Three Day -
Used before the E key to add
72 hours to a time calculation.
D Duration - Used with B and
E keys, and the +1 day, +2 day,
+3 day functions to enter or
calculate the duration of time.
R Rate - Multiplies a numerical or
time value by the rate or
temporarily overrides a stored
rate. See “Rate Function” page
27.
sRStore Rate - Stores a value as
a rate. See “Rate Function”
page 27.