Calculated Industries 9130 - Storing Time Values

User’s Guide — 23
Storing Time Values
Keystroke Display
Access and start timer:
T
TMR
0:00:00.0 HR MIN SEC
T
GO
0:00:01.6 HR MIN SEC
Freeze timer display:
S
SPLT
0:00:05.1 HR MIN SEC
s 1
M-1
0:00:05.1 HR MIN SEC
Clear display and recall value in Memory:
o 0.
r1
M-1
0:00:05.1 HR MIN SEC
Exit timer and clear display:
TToo 0.
The example below uses the value
stored in the previous example. If you
have not already done that example, go
back and complete it before performing
the next example.
Keystroke Display
Recall timer value and add 10 minutes:
r 1
M-1
0:00:05.1 HR MIN SEC
+ 10 m = 0:10:05.1 HR MIN SEC
s 1
M-1
0:10:05.1 HR MIN SEC
o 0.
Recall timer value and subtract 4 minutes:
r 1
M-1
0:10:05.1 HR MIN SEC
– 4 m = 0:06:05.1 HR MIN SEC
s 1
M-1
0:06:05.1 HR MIN SEC
o 0.
Recall timer value and multiply by 5:
r 1
M-1
0:06:05.1 HR MIN SEC
x 5 = 0:30:25.50 HR MIN SEC
s 1
M-1
0:30:25.50 HR MIN SEC
o 0.
Recall timer value and divide by 3:
r 1
M-1
0:30:25.50 HR MIN SEC
÷ 3 m = 10:141667
Clear Memory and display:
C + o 0.