22 — Time Master II
Using the Timer
The
Time Master
™
II
includes a full
function stopwatch / timer with buzzer
and split / lap functions.
The timer can count up from zero or
count down from an entered time. The
display counts in whole seconds, one
decimal place, or two decimal places
by setting the timer preference
(using the P key).
Press the O key while the timer is
running and the timer will be displayed.
The calculator will beep to let you know
the timer is still active. The second
press of the O key will turn the calcu-
lator off.
Keystroke Display
Access timer and count up from zero:
T
TMR
0:00:00.0 HR MIN SEC
T
GO
0:00:02.4 HR MIN SEC
Stop and clear the timer:
T
STOP
0:00:07.1 HR MIN SEC
o
TMR
0:00:00.0 HR MIN SEC
Enter time and start countdown:
200 T
GO
0:02:00.0 HR MIN SEC
Stop countdown and exit the timer:
T
STOP
0:01:55.0 HR MIN SEC
o o 0.
While the timer is counting, you will see
the clock symbol flashing on the bottom
left of the display.
To Next Page
Loading...
Need help?
General
