Dimensional Unit Keys
y - Yards Key
Enters or converts to Yards.
f - Feet Key
Enters or converts to Feet as whole
or decimal numbers. Also used with
the i and / keys for entering
Feet-Inch-Fraction values (e.g., 6
f 9 i 1 / 2 ). Repeated
presses during conversions toggle
between Feet-Inch-Fractions and
Decimal Feet.
i - Inch Key
Enters or converts to Inches. Entry
can be whole or decimal number.
Also used with the / key for entering
Fractional Inch values (e.g., 9i
1 / 2 ). Repeated presses during
conversions toggle between
Fractional and Decimal Inches.
/ - Fraction Bar Key
Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8,
1/16) or improper (3/2, 9/8).
m - Meter Key
Enters or converts to Meters.
P
OCKET
R
EFERENCE
G
UIDE
- 2
To Next Page
Loading...
