Calculated Industries Home ProjectCalc - Memory Operations; Entering Square or Cubic Measurements

Memory
Ç +
(M+) - Adds or stores a value
in the semi-permanent memory (e.g.,
1 5 0 Ç +). Semi-permanent
means the value is cleared when the
calculator is turned off.
Ç – Ç +
(M-) - Subtracts a
value from the semi-permanent
Memory (e.g., 1 5 0 Ç – Ç
+ subtracts 150 from the memory).
Ç =
(MR) - Recalls Memory value
(e.g., if 150 has been stored in Memory,
pressing Ç = will display 150).
Ç o
(MC) - Clears Memory value.
Entering Square or Cubic
To label a dimension as “Square” or
“Cubic,” enter the value, then press the
desired dimension key twice for
Square and three times for Cubic. For
example, to enter 25 Cubic Yards,
press 2 5 y y y.
P OCKET R EFERENCE G UIDE - 4