(Cont’d)
t - Tile
Finds the number of tiles, based on
an entered or calculated area.
Repeated presses will scroll between
numbers of tiles for various “stan-
dard” tile sizes (18”, 16”, 13”, 12”,
10”, 8”, 6”, 4”, 2”, 1” and 24”).
Note: Tile sizes shown in Inches, not Square
Inches. In other words, a 6” tile is really 6” x 6”,
or a 36 Square-Inch tile, but it is labeled as a 6”
size.
c - Carpet
Calculates carpet length required,
based on entered or calculated area.
Repeated presses of c will scroll
between values for 12’, 13’, and 15’
rolls.
C - Concrete
Calculates the number of bags of
concrete required, based on an
entered or calculated volume (e.g.,
cubic feet or cubic yards).
Ç • - Cost
“Cost” function that allows you to
calculate total material cost.
P
OCKET
R
EFERENCE
G
UIDE
- 6
To Next Page
Loading...
