Calculated Industries Ultra Measure Master User Manual

The following examples show how lin-
ear dimensions are entere d :
D i m e n s i o n K e y s t ro k e s
5 Feet 5 [Feet]
1/2 Inch 1 [/] 2
5 Feet 1 - 1 / 2 I n c h 5 [Feet] 1 [Inch] 1 [/] 2
10 Ya rd s 10 [Yds]
17.5 Meters 17.5 [m]
Any units of measurement other than
inches must be entered as whole values
(5 yards) or decimal values (5.5 m e t e r s ) ,
and not in combination with feet and
inches or with themselves. For exam-
ple, you cannot enter 12 meters 6 cen-
timeters 4 millimeters.
To convert a linear value on your dis-
play, press the [ C O N V ] key, then the
key for the linear dimension to which
you want to convert. For example,
[CONV] [mm] converts to millimeters.
U s e r ’s Guide – 3 1

Calculated Industries Ultra Measure Master Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Silver
Digits	11 digits
Display type	LCD
Display tilting	No
Display size (HxV)	19 x 65 mm
Display number of lines	- lines
Display size (HxV) (imperial)	0.73 x 2.56 \
Storage media type	-
Battery type	CR2016
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	17 mm
Width	76 mm
Height	145 mm
Weight	117.7 g