2
INSTALLER
2 - General instructions
• Carefully read this manual because
it will give you important instructions
regarding the safety of use,
installation and maintenance.
•
The system must be implemented
in
compliance with the safety
regulations in force.
•
After unpacking and before installing
check that the product is intact.
•
This device is to be used only for
the use it has been designed for any
dif
ferent use is improper.
•
In case of repair, contact only
technical service centers authorized
by the
manufacturer.
•
Non-compliance with the above may
endanger the safety of the device.
•
The manufacturer cannot be held
liable for any damages resulting from
bad operation, extraordinary events,
conguration errors or improper,
wrong and unreasonable use of the
device.
• The manufacturer reserves the right to
eventually make changes to the device
and whatever else appears necessary
for the continual improvement there of.
To Next Page
Loading...