CALEFFI SATKF2000 - Setting Up Outside Probe K Value

23
USER
T ow (°C)
T outside (°C)
7.7 - Setting up outside probe K value
MIN can be either 25°C or 45°C
according to the setting of the heat
interface unit. MAX is the set heating
ow temperature.
This setting option is available only
if the outside probe is connected and
the use
for modulation is enabled.
This parameter allows to select the
steepness of the modulation curve for
weather compensation.
1. Press key until icon k starts
blinking.
2. Turn button to set the value
you
want.