25
USER
8 - Setting up clock and temperatures
If the operation mode selected is WINTER
or HEATING ONLY, the device allows you
to manipulate the room temperature either
MANUALLY or AUTOMATICALLY.
If the thermostat function is enabled
(P00 = 1):
• In MANUAL mode the user selects the
room temperature he wants, and this
temperature will be maintained until a
change is made.
• In AUTOMATIC mode the room tempera-
ture set point is determined by the cor-
respondence between time-day and the
set weekly program.
• In AUTOMATIC (holiday) mode the room
temperature set point is determined by
the correspondence between time-day
and the set holiday program.
If the thermostat function is disabled
(P00 = 0):
• In MANUAL mode the heating func-
tion depends solely on the signals
from external thermostats connect-
ed to the heat interface unit.
• In AUTOM. / AUTOM. (holiday)
mode the remote control device
acts as a clock, setting a time pro-
gram for the heating function for all
thermostats connected to the heat
interface unit.
To Next Page
Loading...
Need help?
General
