CALEFFI SATKF2000 User Manual

4
INSTALLER
4 - Installation
1. The SATK’S remote control device
must be installed only by expert
personnel. To correctly install the
device and in compliance with the
regulations in force about electrical
appliances, use a dedicated cable
raceway to connect it. In case this
is impossible, any interference due
to electric wires may c
ause poor
working of the remote con
trol device.
When used as a room thermostat,
install the
SATK’S remote control
device at approx. 1.5 m over oor in
a place suitable for correct sensing of
the
room temperature. Do not install
behind
doors, curtains, near heat
sources nor
expose to direct sunlight
or water sprin
kles.
NO
NO
1.5 mt
NO
YES

CALEFFI SATKF2000 Specifications

General

Brand	CALEFFI
Model	SATKF2000
Category	Remote Control
Language	English