CALIENT S Series Hardware User's Guide

S320 OCS Hardware User Guide
Doc. Part No. 460167-00
May 27, 2015
Rev. B7
Page 15 of 46
 When optical cables or optical connectors are not connected, make sure the cables
and/or connectors are capped. Be sure to use clean caps.
 Handle the fiber cables as little as possible.
 Never eat, drink or smoke around optical equipment.
 Keep cable runs neat and observe the MBR when bending fiber-optic cables.
2.4 Cleaning Substance Hazards
2.4.1 Isopropyl Alcohol
It may be necessary to use a solvent when cleaning optical fiber connectors. The recommended
solvent for cleaning optical fiber connectors is isopropyl alcohol (IPA) that is 99.8+% pure.
DOT Hazard Classification: Flammable Liquid
Always observe the following precautions when handling isopropyl alcohol:
 Keep the container closed and away from heat, sparks or open flame.
 Use with adequate ventilation.
 Avoid breathing the vapor.
 Avoid contact with eyes, skin and clothing.
 Wash thoroughly after handling.
 Store in an approved flammable materials cabinet when not in use.
 Dispose of materials soiled with IPA in a clearly marked container approved for
such purpose.
 If a spill occurs, clean up the spill and dispose of contaminated materials in
accordance with local requirements for hazardous waste.

CALIENT S Series Specifications

General

Brand	CALIENT
Model	S Series
Category	Switch
Language	English