Need help?Do you have a question about the CALIENT S320 and is the answer not in the manual?
Describes the intended audience for the guide, assuming familiarity with WebGUI technology.
Monitors system alarms and events, allowing filtering for detailed analysis.
Describes the procedure for changing the system's default password via the WebGUI.
Covers OCS provisioning, services, alarms, software, and network information.
Details how to configure system alarms, including soak interval and severity levels.
Provides information on monitoring the software version running on the system.
Outlines procedures for system reboot, shutdown, and soft reset operations.
Explains how to access and manage active Web and TL1 sessions on the system.
Covers accessing and using system user management tools for creating and managing users.
Displays detailed information for each installed board, including type, location, and alarm state.
Lists system ports, hardware components, and their mapping to mirrors for monitoring.
Lists all currently connected ports, mirrors, and hardware components driving them.
Describes the procedure for adding a cross-connection to the switch via the WebGUI.
Provides detailed information on all currently configured connections, including status and power levels.
Details how to access and use the system's Save/Recall functionality for cross-connect configurations.
Lists all ports configured on the system, including port description, alias, and power.
Displays detailed information for a specific port, including power, circuit ID, and monitor configuration.
Explains how to add a port group to the system by selecting ports and configuring thresholds.
Lists all port groups on the OCS, including group name, individual ports, and port count.
Describes how to set up the system to allow separate aliases for input and output ports.
Details how to configure port aliases using the Port Summary screen.
Explains how to configure port aliases directly from the Add Cross Connection screen.
To Next Page
General