CALIENT OCS WebGUI Quick Start Guide
Page 33 of 63
If no Port Groups have been configured for the system, none will be listed on the
Create User screen. If this is the case, go to the WebGUI Home page and navigate to
Port Group > Add , fill in the required fields on the Add Port Group screen, and click
Save to add one or more Port Groups.
7. Click the Yes or No radio button next to the Web Access, TL1 Access and Multiple
Sessions parameters to enable or disable them. The default setting for the parameters
is Yes.
8. Click the Save button at the bottom of the screen to create a new user based on the
information specified in steps 3 through 6; OR click the Reset button to clear all the
specified information and start over; OR click the Back button to return to the User
Management screen without saving the specified information/selections.
4.6.2 Modifying a User
The following procedure describes how to modify a system user with the WebGUI:
1. Navigate the following path: Node > Summary > User Mgmt. The User Management
screen will open.
2. Click the radio button for one of the listed users to select that user. The User Detail for
the selected user will appear beneath the list of users.
3. Click the Modify User button at the bottom-left of the User Management screen. The
Modify User screen for the selected user will open.
To Next Page
Loading...
