CALIENT S320 - Software Management

CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 27 of 63
5. Select one of the following options from the dropdown menu to change the severity
level of the alarm:
 CR – Critical alarm
 MJ – Major alarm
 MN – Minor alarm
 NA – Not Alarmed
6. Click the Save button at the bottom of the screen to save any changes, or click the Reset
button to disregard them.
4.3 Node > Summary > Software Management
The following steps describe how to monitor the software version running on the system:
1. Log into the WebGUI.
2. Navigate the following path: Node > Summary.
3. Click the Software Mgmt tab on the Node Summary screen. The Software Management
screen will open, listing the various components of the software version currently
running on the system.