CALIENT S320 - Ports Group Summary

CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 57 of 63
6. Make any desired changes to the threshold information displayed in the Port Group
Configuration section of the screen.
7. Click the Save button at the bottom of the screen to save the port selections and
changes. Or, click the Clear button to cancel the port selections and reset any threshold
changes to their original settings.
If you click Save, a dialogue box will appear, asking you to confirm that you want to add
the new port group.
8. Click the OK button in the dialogue box to add the new port group. The Port group
summary screen will open, listing all port groups on the OCS, including the newly
added group.
8.2 Ports Group > Summary
The following procedure describes how to access summary information for all port groups on
the OCS:
1. Log into the WebGUI.