30
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
November 2022.
Powering up the BLAST u4g
To power up the BLAST u4g
1. Locate the 12 VDC Power Adapter inside the packaging of the u4g
2. Attach one end (8-pin (2 x 4) connector) to the rear of the u4g.
3. Plug the other end into any available 110/220 VAC wall outlet.
4. Depress the power on/off toggle switch - the u4g begins the power-up sequence.
To Next Page
Loading...
