MEASUREMENT MODES
1. Standard - Standard Mode is recommended when measuring
distances to larger objects. (Fig. A)
2. P.A.T. (Pin Acquisition Technology) - P.A.T. Mode is best used
when measuring the distance to a agstick or smaller objects. To
toggle between Standard and P.A.T Mode, PRESS and RELEASE
the Mode Button (M). When P.A.T. Mode is activated, the agstick
icon will appear on the left side of the LCD display. (Fig. B)
3. Birdie Technology - Device will “chirp” when locked onto the pin.
To toggle on/o PRESS the Mode button (M). The “b” icon will
appear when Birdie Technology is turned on. (Fig. C)
6 HOW TO USE
To Next Page
Loading...
