EasyManua.ls Logo

Cambridge Air Solutions S400 - User Manual

Default Icon
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
S-SERIES
DIRECT GAS-FIRED
INDUSTRIAL BLOW-THRU
®
SPACE HEATER
TECHNICAL MANUAL
mWARNING:
Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury or death. Read the installation, operating, and maintenance instructions
thoroughly before installing or servicing this equipment.
FOR YOUR SAFETY
The use and storage of gasoline or other flammable vapors and liquids in open containers
in the vicinity of this appliance is hazardous.
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don’t touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier.
®
90.1
ASHRAE
ASHRAE
COMPLIANT
COMPLIANT
Made in the USA
®
S-TM8-0120

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cambridge Air Solutions S400 and is the answer not in the manual?

Summary

S-Series Technical Manual

Hazard Identification and Safety Warnings

Identifies hazardous situations, warnings, and cautions for safe operation and installation.

Heater Operation and Configuration

Explains how the heater functions and details its internal components.

Installation Instructions

Uncrating, Location, and Utility Connections

Covers uncrating, mounting location, gas piping, and electrical wiring.

Specific Mounting Type Installation

Details installation for roof top, thru wall, and under roof mounting configurations.

Vertical Mounting and Accessory Installation

Covers vertical indoor/outdoor mounting and accessory installation.

Control Systems and Operation

Remote Controls, Sensors, and Start-Up

Guides on remote controls, sensors, and the initial start-up procedure.

Calibration and Operating Sequences

Provides calibration steps and explains operating sequences for various control modes.

TSS Controller Setup and Programming

Instructions for setting up and operating the TSS controller, including schedules.

Maintenance and Troubleshooting

Routine Maintenance Procedures

Covers blower/motor lubrication, filter service, and burner cleaning.

Troubleshooting Common Issues

Provides solutions for problems related to blower, heat, controls, and valves.

References

Electrical and Gas Train Diagrams

Provides schematics for electrical wiring and gas piping configurations.

Individual Component Descriptions

Detailed explanations of various heater components and their functions.

Cambridge Air Solutions S400 Specifications

General IconGeneral
BrandCambridge Air Solutions
ModelS400
CategoryHeater
LanguageEnglish

Related product manuals