Page 12 - Manual FA01669-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Configuring the number of call rings
1
Press the button as many times as the number of rings you want (from 1 to 12 rings, depending on the chosen
melody).
Three seconds after the button was last pressed, the video receiver will simulate a call with the chosen number
of rings.
2
Press to confi rm your choice and exit confi guration.
Adjusting brightness, contrast and colour
With the video active, press any one of the following buttons:
, , or to view the video settings menu.
From this screen, you can view and change the video
parameters.
1
Brightness
2
Contrast
3
Saturation
Use the
and buttons to select one of the parameters.
Use the and buttons to increase/decrease the value of the selected parameter.
CAME S.p.A.
Via Martiri della Libertà, 15
31030 Dosson di Casier
Treviso - Italy
Tel. (+39) 0422 4940
Fax (+39) 0422 4941
info@came.com - www.came.com
To Previous Page
Loading...
Need help?
General
