Page 7 - Manual FA01669-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
ADVANCED FUNCTIONS
OPEN GATE and GATE STATUS function
The open gate function is used to activate the open/close gate function and view the gate status (open/closed) via the LED on
the button.
The function must be activated during system programming.
The DOOR STATUS function is active by default. The OPEN GATE/GATE STATUS function must be correctly
confi gured. The two functions cannot both be active at the same time.
> 3s
Press and hold the button for more than 3 seconds to
send an open or close gate command.
AUTOMATIC DOOR RELEASE function
This function allows you to automatically open the entrance when you ring the bell from the entry panel. Communication is not
activated and the call ends automatically. It is recommended for professional practices.
The function is available by default. It can be removed during system programming.
> 5s
Press and hold the button for more than 5 seconds to
activate or deactivate the function.
The LED switches on to indicate that the
function is active.
To Next Page
Loading...
Need help?
General
