Page 6 - Manual FA01669-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Communication between internal receivers (INTERCOM function)
INT. 1
INT. 2
To start communicating with another internal receiver (INTERCOM), pick up the handset and press the button associated with
the internal receiver you want to call.
If the line is busy, you will hear three consecutive beeps.
During a conversation between internal receivers, the devices beep every 5 seconds to signal a call from the
outside.
DOOR STATUS function
The system must be correctly set up.
Use this function to view the current door status (open/
closed) via the LED on the button.
The function is active during communication with
the outside.
To Next Page
Loading...
