CAME BPT TA/450 User Manual

E
A
Page 9 - Manual FB00801-EN - ver. 1 - 07/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Selecting the operating mode
Press the button A repeat-
edly to choose the operating
mode for the thermal zone.
Heating.
Cooling.
O.
Press the
button to activate
one of the two available profiles.
Each profile can be programmed
independently and be activated
at any time, taking over from the
active profile.
N.B. After 15 seconds of inactivity, the unit automatically exits the procedure, storing
the last data set.
N.B. Each time the
buttons are pressed, the digits on the display decrease or
increase by one unit. If they are held down, the digits on the display move slowly for the
first five seconds, then faster.
Selecting the user profile
Press the button E to finish
the time and day setting proce-
dure G.
The colon between the hours and
minutes will flash confirming the
operation has been completed.

CAME BPT TA/450 Specifications

General

Brand	CAME
Model	BPT TA/450
Category	Thermostat
Language	English