CAME BPT TA/450 User Manual

B
A
Page 10 - Manual FB00801-EN - ver. 1 - 07/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Once you have chosen the desired program, the screen will display the temperature
associated with the selected program for 2 seconds before going back to showing the
Press the
button to choose
one of the three programmed
temperature levels.
Each time the button is pressed,
the screen will cycle through
the name of the program being
activated:
A
- - B
Activating a programmed temperature level (comfort, eco, night)
Programming the frost protection temperature.
N.B. Although the zone is excluded from the control, the frost protection feature is still
active.
OFF mode
When the icon lights up and
the ambient temperature disap-
pears for 5 seconds, this confirms
that the thermal zone has been
excluded from system control B.
Press the
button.
The display shows the default frost
protection temperature (3 °C).
The
buttons allow you
to vary the programmed frost
protection temperature at a value
between 3 and 16 °C.
Press the
button to exit and
save the set data.

CAME BPT TA/450 Specifications

General

Brand	CAME
Model	BPT TA/450
Category	Thermostat
Language	English