CAME BPT TA/450 - Setting Lock Features; Temperature Level Setting Lock

E
A
F
B
Page 18 - Manual FB00801-EN - ver. 1 - 07/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Use the buttons to enable/
disable the lock.
= Lock disabled.
= Lock enabled.
Press P and
to confirm the
programming.
To prevent the programmed
levels from being changed or
the temperature level from being
changed manually, press the P
and
buttons for 3 seconds.
Temperature level setting lock
Press E to confirm the
programming.
If boiler ignition is cancelled
because the input is open, the
display shows the message
.
Use the
buttons to enable/
disable the window input.
= Input disabled.
= Input enabled.