Pag.
10 - Manual code:
119 G3074 ver.
0.1 02/2009 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Carry out the following periodic maintenance:
Check turnstile’s internal cabling, check that cables are not disconnected or damaged.
By turning the tripod, check for any faulty movements and that the rotation is homogenous. A sudden blocking may indicate a
malfunction.
By trying to move it, try to properly secure the turnstile to the ground, because unstable securing can result in danger.
Do not clean the turnstile with chemical products that may damage the stainless steel, do not use abrasive substances
or rags that may scratch the surface.
11.1 Periodic maintenance
DISFUNCTIONS POSSIBLE CAUSES CHECKS AND REMEDIES
The turnstile
stays released in
both directions of
travel
• No power
• Stop button is stuck or broken
• Emergency button is pressed
• Electroblocks are not working.
• Check power source
• Call assistance
• Reload the emergency button
• Call assistance
The turnstile only
releases in one
direction
• One of the electroblock is broken down
• The spring of one of the electroblocks has become disconnec
ted
• Call assistance
• Call assistance
The turnstile stays
blocked
• The person passing through leaned on the arm before the
release took place.
• Both electroblocks stay wound up
• Tell the person not to lean on the arm
and try to release
• Call assistance
The turnstile
blocks suddenly
• The hydraulic brake is not working properly • Call assistance
11.2 Trouble shooting
11 Maintenance
Came Cancelli Automatici company is ISO 9001:2000 certified for its in-house quality system and ISO 14001 certified in terms of its
environmental practices.We kindly ask you to keep on respecting the environment – CAME considers this one of the fundamentals
of its own development and market operation strategies, by simply following these brief disposal instructions:
DISPOSING OF THE PACKAGING
The packaging components (cardboard, plastic, etc.) are considered solid urban waste and may disposed without any trouble in the
proper cycling bins supplied by your municipality.
DO NOT DISPOSE OF IN THE ENVIRONMENT
DISPOSING OF THE PRODUCT
Our products are made with different materials. The majority of these (i.e. aluminium, plastic, iron, electrical cables) consist of solid
urban waste. They can be recycled at authorised recycling centres. Other components (electronic boards, remote control batteries,
etc.) may contain toxic substances.
They must therefore be removed and turned into authorised firms that will dispose of them properly. Before proceeding it is always
best to check the specific legislation in your municipality.
DO NOT DISPOSE OF IN THE ENVIRONMENT
12 De-commissioning and disposal
Intelligent Security & Fire Ltd.
To Next Page
Loading...
