900
900
80
800
250
770
Ø 40
800
160
820
150
Ø25
#
Pag.
- Manual code:
119 G3074 ver.
0.1 02/2009 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
This product is designed and built by CAME Cancelli Automatici S.p.A. in compliance with the current safety legislation. Guaranteed
24 months unless tampered with.
Selective, bidirectional, electromechanical turnstile, entirely made of AISI 304 stainless steel with “scotch-brite” fi nish, fi tted with
a removable top cover with key lock, and removable side legs. The aluminium tripod head bears a shiny fi nish and stainless steel,
shiny-polished arms.
It works by allowing only one person to transit through in the desired direction. A command on the device releases the mechanism
to manually push the tripod arm until the mechanical brake slows the tripod down to its resting position, until a new command is
given.
The complete range:
BPAP01A – Counter-clockwise monodirectional, mechanical trnstile complete with hydraulic brake. Body made of varnished steel.
BPAP01O – Clockwise monodirectional, mechanical turnstile complete with hydraulic brake. Body made of varnished steel.
BPAP07 - Bidirectional, electromechanical turnstile, body in galvanised, varnished steel with hydraulic brake, electronic board, and
LED stop/go directional lights.
4.1 Turnstile
4 Description
2.1 Intended use
1 Legend of symbols
This symbol shows parts to be read carefully.
This symbol shows parts related to safety.
This symbol shows what to tell users.
This symbol shows parts that exclusively concern electromechanical models.
2 Conditions of use
The BRIDGE electromechanical turnstile is designed to select transit flows in high-volume passage areas, and in highly fre-
quented contexts like stadiums, airports, stations, public buildings and in any other places where high-volume flows need to be
regulated and/or selected.
Any installation or use other than that shown in this manual is prohibited.
3 Reference Legislation
“IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION”
“WARNING: WRONG INSTALLATION MAY CAUSE SERIOUS INJURY, FOLLOW ALL INSTALLATION INSTRUCTIONS”
“THIS MANUAL IS EXCLUSIVELY MEANT FOR PROFESSIONAL INSTALLERS OR OTHER COMPETENT PERSONS”
The product being described herein complies with the following legislation: see compliance statement.
4.2 Technical Data and dimensions
PSAP01A - PSAP01O
Protection rating: IP44
Weight: 60 Kg
Suggested distance between one
turnstile and another in case of
multiple installation.
PSAP07
Power: 230V A.C. 50/60 Hz
Power Draw: 233 mA max
Insulation class: II
Protection rating: IP44
Weight: 50 Kg
Intelligent Security & Fire Ltd.
To Next Page
Loading...
