Ø40 mm
Ø20 mm
MM
Pag.
-
Manual code
:
119 G3074 ver.
0.1 02/2009
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Position the turnstile in the exact point where it will be
anchored and mark the holes with a pencil.
Remove the turnstile and apply (Ø 12mm) holes where you have
marked them.
Insert the Ø 12mm, minimum length 50 mm gussets into the
holes you have made.
Position the turnstile along the gussets and run any cable
conduits through the central hole.
Using a ratching driver, secure the turnstile to the ground.
Intelligent Security & Fire Ltd.
To Next Page
Loading...
