ESC < > ENTER
a3
ESC < > ENTER
i
ESC < > ENTER
cl i
ESC < > ENTER
op I
p.
23 - Manual code:
FA0 0132
-EN v.
2 08/2016
© CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without notice.
1. Select A 3.
Press ENTER to confirm.
2. Select 1 and press ENTER to confirm that the barrier has cali-
brated itself automatically.
Travel calibration
Before doing a travel calibration, establish the boom type, check that the boom is balanced and that the maneuvering area is free of
obstructions.
Important! While calibrating, all of the safety devices will be disabled excluding the TOTAL STOP one.
3. The barrier will perform a closing maneuver until the endstop
point...
4. ... then, the barrier will perform an opening maneuver until the
endstop point.
To Next Page
Loading...
Need help?
General
