Need help?Do you have a question about the CAME G4040E and is the answer not in the manual?
General| Power | 300 W |
|---|---|
| Boom length / Maximum Leaf Width | 4 m |
| Protection class / Protection Rating | IP54 |
| Operating Temperature | -20 °C to +55 °C |
| Voltage | 230V AC |
| Opening time | 4 seconds |
Crucial safety guidelines for users, emphasizing careful reading.
Highlights critical dangers like hand crushing and high voltage.
Covers preparation, installation steps, and general recommendations for use.
Details material, intended application, and usage limitations of the barrier.
Lists key performance data, electrical specifications, and physical measurements.
Lists and identifies all major components of the barrier system.
Details parts and accessories required for a typical installation.
Provides essential guidance and requirements for qualified installers.
Lists necessary tools, materials, and cable specifications for installation.
Detailed steps for creating a secure foundation and anchoring system.
Steps to access internal components and prepare the barrier for boom attachment.
Instructions for positioning and securing the main barrier cabinet.
Steps for attaching the boom-attachment cover and motor plates.
Steps for fitting the boom and securing it to the barrier.
Instructions for fitting protective profiles and end caps to the boom.
Table to select the correct spring based on boom length and accessories.
Instructions on how to hook the rod and adjust spring tension for stability.
Verifying the spring's working state in different boom positions.
Details on power supply, control devices, and the fuse table.
Identifies the various parts and connectors on the control panel.
Explains terminals for accessories and overall power limits.
Illustrates the pre-connected gearmotor wiring for installation.
Details on connecting transponders, keypads, stop buttons, and antennas.
Instructions for fitting AF, R800, and R700 decoding cards.
Information on indicator lights, luminous cords, and dome lights.
Explains functions of photocells and safety inputs like C1, C4, C5, C9.
Illustrates safety connections for DIR/DELTA S and DELTA photocells.
Explains how to activate sleep mode to reduce standby power consumption.
How to adjust the boom's vertical endstop points.
How to adjust the boom's horizontal endstop points.
Explains the function of ESC, ENTER, and arrow keys for programming.
Step-by-step guide on how to browse and select menu items.
Comprehensive list of available functions and their purposes.
Key functions to set first, including boom type, motor test, and total stop.
Explains functions related to safety tests, maintained action, and obstruction detection.
Details functions for automatic closing, preflashing, working time, and speed settings.
Covers slow-down speeds, calibration, and sensitivity adjustments.
Details serial connections, data saving, sleep mode, and pre-flashing.
Procedures for adding, deleting, and managing users and their commands.
Covers boom type, motor test, calibration, and parameter reset.
Steps to select calibration and confirm the automatic process.
Describes the barrier's closing and opening movements during calibration.
Guide to assigning specific commands to individual users.
Instructions for removing a single user's entry from the system.
Steps for fitting covers and securing the barrier after setup.
Instructions on how to safely release the boom manually.
How to set up two barriers to operate in a paired mode.
Process for copying settings from a master to a slave barrier.
How to set up two barriers to operate in an alternate mode.
Process for copying settings from a master to a slave barrier.
Lists and explains common error messages indicated by LEDs or display.
Provides solutions for common operational problems with references.
Table for logging routine maintenance performed every six months.
Table for recording detailed repairs and improvements by technicians.
Instructions for safe and environmentally compliant dismantling and disposal.
To Next Page
