EasyManua.ls Logo

CAME GARD G6000 - Safety Devices Configuration; Photocells Input Setup

CAME GARD G6000
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
&


$
$
RX TX
./ # .#

&


$
$
RX TX
DIR DELTA-S
DELTA
p. 15 - Manual FA01116 -EN - 01/2018 - © CAME S.p.A. - Translated original instructions
Photocells
Configure NC contact/s C1 and/or C5, input for safety accessories such as photocells.
C1 reopening while closing. When the boom is closing, opening the contact causes its movement to invert until fully opened;
If unused, shortcircuit contact 2-C1.
C5 immediate closing. Closing the boom after a vehicle has passed through the operating area of the safety devices.
If unused, set DIP switch 8 to ON.
SAFETY DEVICES

Related product manuals