p. 9 - Manual FA01116 - EN - 01/2018 - © CAME S.p.A. - Translated original instructions
Fit the barrier between the drive shaft plate and the barrier anchor point and fasten it using the screws.
FASTENING THE BARRIER
Place the cabinet onto the anchoring plate and fasten it using nuts and washers.
Internal zone
Entry side
Internal zone
Entry side
RIGHT barrier
LEFT barrier
To change the rotation at a later date, request the documentation from your local retailer or contact Came in your Country (see the
last page or visit www.came.com)
To Next Page
Loading...