What to do if my CAME Gate Opener opens but does not close?
If your CAME Gate Opener opens but doesn't close, the photocells might be dirty. Clean the photocells and check if they are functioning properly.
Why my CAME Gate Opener neither opens nor closes?
Your CAME Gate Opener might not be opening or closing due to several reasons. First, check if the main power supply is working. It could also be that the gearmotor is stuck, in which case you should lock it. If the transmitter isn't working, replace the batteries. If the problem persists, the transmitter may be broken, or the stop button, opening/closing button, or key-switch selector might be stuck or broken. In these cases, it is best to call for assistance. Also, a non-functional wireless accessory can cause this issue, requiring you to call for assistance.
General| Current Draw | 1.5 A |
|---|---|
| Duty Cycle | 30% |
| Operating Temperature | -20°C to +55°C |
| Protection Rating | IP44 |
| Opening Time at 90° | 15 s |
| Power Supply | 230V AC |
Crucial safety warnings and precautions for operating and installing the gate operator.
Outlines essential checks before installation and provides user recommendations for safe operation.
Presents a comprehensive table of technical data including power, thrust, speed, and temperature ratings.
Instructions for placing the gearmotor on the anchoring plate and routing electrical cables correctly.
Details how to fasten the rack to the gate, including assembling rack modules and ensuring full coverage.
Explains how to adjust the pinion-rack mesh for smooth operation, preventing gate weight strain.
Instructions on setting the limit-switch positions on the rack for precise opening and closing endpoints.
Covers the main power supply, fuses for line and accessories, and control board components.
Details the 230V AC input, 24V AC/DC outputs for accessories and control board power.
Illustrates the factory wiring for the gearmotor, encoder, and limit-switch contacts.
Guides on connecting transponder readers, GSM modules, and AF cards for remote control.
Details how to connect and configure photocells for various safety functions like reopening or partial stop.
Explains the connection and configuration of sensitive safety edges for safety operations.
Explains the functions of the ESC, ENTER, and arrow keys used in the programming menu.
To Next Page
