What to do if my CAME Gate Opener opens but does not close?
If your CAME Gate Opener opens but doesn't close, the photocells might be dirty. Clean the photocells and check if they are functioning properly.
Why my CAME SDN8 neither opens nor closes?
Your CAME Gate Opener might not be opening or closing due to several reasons. First, check if the main power supply is working. It could also be that the gearmotor is stuck, in which case you should lock it. If the transmitter isn't working, replace the batteries. If the problem persists, the transmitter may be broken, or the stop button, opening/closing button, or key-switch selector might be stuck or broken. In these cases, it is best to call for assistance. Also, a non-functional wireless accessory can cause this issue, requiring you to call for assistance.
Critical safety warnings for users and installers to prevent injury and damage.
Connecting various control devices, accessories, and remote control systems.
Configuring and connecting photocells and sensitive safety edges for operational safety.
Guide to using buttons and navigating the programming menu for system settings.
Comprehensive list and explanation of all programmable functions available for the operator.
Automatic calibration of the gate's opening and closing travel.
General| Operating Temperature | -20°C to +55°C |
|---|---|
| Protection Level | IP44 |
| Power Supply | 230V AC |
| Usage | Residential |
| Maximum Leaf Width | 4m |
| Safety Devices | Photocells |
To Next Page
