CAME SDN8 User Manual

p.
26
26 - Manual code
FA 00 014- EN
FA00014-EN v.
3
3 04/2016 - © Came S.p.A. The contents of this manual may be changed at any time without prior notice.
RELEASE
FINAL OPERATIONS
Once the electrical connections are done and the set up is fi nished, fasten the cables to the gearmotor jumper
using a cable tie.
Fit the cover and fasten it to the sides using the screws.
RELEASING THE GEARMOTOR
⚠
This procedure must be done with the main power cut o .
⚠
Manually releasing the operator may result in uncontrolled movement of the gate, if this has any mechanical
problems or is unbalanced.
LOCK

CAME SDN8 Specifications

General

Brand	CAME
Model	SDN8
Category	Gate Opener
Language	English