To Next Page
T
Taylor NealAug 6, 2025
What to do if my CAME SDN6 opens but does not close?
- Sshane80Aug 7, 2025
If your CAME Gate Opener opens but doesn't close, the photocells might be dirty. Clean the photocells and check if they are functioning properly.
What to do if my CAME SDN6 opens but does not close?
If your CAME Gate Opener opens but doesn't close, the photocells might be dirty. Clean the photocells and check if they are functioning properly.
Why my CAME SDN6 neither opens nor closes?
Your CAME Gate Opener might not be opening or closing due to several reasons. First, check if the main power supply is working. It could also be that the gearmotor is stuck, in which case you should lock it. If the transmitter isn't working, replace the batteries. If the problem persists, the transmitter may be broken, or the stop button, opening/closing button, or key-switch selector might be stuck or broken. In these cases, it is best to call for assistance. Also, a non-functional wireless accessory can cause this issue, requiring you to call for assistance.
General| Brand | CAME |
|---|---|
| Model | SDN6 |
| Category | Gate Opener |
| Language | English |
Instructions for positioning and connecting the gearmotor onto the anchoring plate.
Procedures for attaching the rack to the gate and its modules.
Method for setting the correct meshing distance between the pinion and rack.
How to set the mechanical limits for gate opening and closing.
Diagram showing how to connect the main power supply.
Illustrates the factory-standard wiring for the gearmotor, encoder, and limit switches.
Wiring for gate open and flashing light outputs.
How to connect various control inputs like stop buttons and access controls.
Information on installing communication modules and remote control accessories.
Details on connecting and configuring photocells for safety.
Instructions for connecting and configuring safety edges.
Guide for installing and configuring wireless safety accessories.
Instructions for connecting two operators for synchronized use.
Explanation of the function keys and their roles in programming.
Step-by-step instructions on how to navigate the programming menu.
A comprehensive list of all available functions with their codes and brief descriptions.
