Page 29 - Manual FA01812-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Network
CONNECTIONS
Network
Help Log out
System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Diagnostics
CONNECTIONS
CAMECONNECT
MAC ADDRESS
MODE
IP ADDRESS
NETMASK
GATEWAY
DSN
[MAC ADDRESS] gives the MAC ADDRESS of the device and cannot be changed.
Under [MODE] you can choose the type of addressing, either [STATIC] or [DHCP].
DHCP
If you choose [DHCP] the IP address of the device is assigned by the DHCP server.
If the device is confi gured as the master (serverless system), make sure that the DHCP
server always assigns the same IP address to the device.
STATIC
Under [IP ADDRESS] manually assign the address.
The device IP address must belong to the same SUBNET as the ROUTER and the other
connected devices.
Under [NETMASK] type in the NETMASK, where di erent from the default setting.
Under [GATEWAY] type in the default GATEWAY for the network it belongs to.
Under [DSN] type in a valid address to connect to CAMEConnect.
Press [SAVE] to save the confi guration.
Press [RELOAD] to reload the previous data.
To Next Page
Loading...
Need help?
General
