Page 32 - Manual FA01812-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
SIP
Help
Log out
ACCOUNT
TRUNKS
FEATURES
NODES STATUS
System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Diagnostics
RING TIME
RING TIME WITH DIVERSION
DOOR RELEASE
Activation codes
FEATURES
Only for devices confi gured as the MASTER.
Under [RING TIME] you can set the time to elapse before the user called is considered to be absent.
This parameter is used if CAMEConnect is not active or if simultaneous local and remote
calls have been activated.
Under [RING TIME WITH DIVERSION] you can set the time to elapse before the call is diverted.
This parameter is used with CAMEConnect active or for sequential calls.
Under [DOOR RELEASE], [AUX1] and [AUX2], the DTMF numerical codes assigned to these commands
can be viewed and modifi ed.
To Next Page
Loading...
Need help?
General
