Camp Chef FTG475 - Page 10

10
5. Install the upper shelf as shown in Figure 2. Tighten all hardware.
TANK BRACKET (1)
FTG600-23
M6 X 16 BOLT (10)
LEVELING FOOT (2)
FTG600-17
LOWER SHELF (1)
FTG475-1
UPPER SHELF (1)
FTG475-2
FIG 2
6. Install the lower shelf as shown in Figure 2. Tighten all hardware. Note: Lower shelf has extra holes for the tank bracket. Shelf
must be oriented so that the tank bracket is on the side of the stove with the regulator hose.
7. Install the tank bracket as shown in Figure 2. Tighten all hardware.
8. Install the leveling feet as shown in Figure 2. (Note: The leveling feet can be adjusted later to level the grill)
9. Install the wheels as shown in Figure 3. Tighten the axle bolt.
CART WHEEL (2)
CCH-25
CART WHEEL CAP (2)
CCH-27
AXLE BOLT (2)
FTG600-20
FIG 3
10. Install the wheel cap as shown in Figure 3.
11. Stand the grill upright.
12. Install rear leg bracket as shown in Figure 4.
REAR LEG BRACKET (1)
FTG475-3
M6 FLAT WASHER (4)
M6 X 16 BOLT (4)
FIG 4