CAMPARK T80 - External Power Supply and Strap Assembly

6.4.Externalpowersupply
Thecameracanbeoperatedusing
powerfromanexternalpowersupply.
A6Vpowersupplywithatleast
1.5Aisrequiredcontaininga
connectorwitha3.5mmexternal
and1.35mminternaldiameter
(internalpisitivepole,externalnegativepole).
6.5.Assemblywithstrap
UsethesecuringstrapsuppliedtoattachtheWildlifeCameratoatreeor
anotherobject.Theillustrationsbelowdemonstratehowtofastenthe
securingstrap.
PositiontheWildlifeCameraasdesiredandpullthelooseendofthesecuring
straptightuntilthecameraisfirmlysecured.
Toreleasethesecuringstrapagain,pullatthetabofthesecuringstrap.
11