CAMPARK T80 - Settings

FUNCTIONSOFOPERATINGBUTTONSINMENU
Below,theoperatingbuttonsaredescribedinthereplaymodewithactivated
menu.(RecordingandReplaymode).
ClosetheMainmenuoranysubmenubypressingtheMENUbutton.
Moveuponemenupointorincrementvalueby1.
Movedownonemenupointordecreasevalueby1.
Moveforwardlytothedatasetting.
Movebackwardlytothedatasetting.
Openselectedoptionsoracceptselectedsettings.
ConfirmeachchangetoasettingbypressingOK.Ifthechangeisnot
confirmedbypressingtheOKbutton,thenewsettingarelostwhen
leavingthemenu.
Nofunction(inMENUmode).
7.3.Settings
PriortousingtheT80Camera,changethesettingsasrequired.Slidethemodeswitchofthe
T80CameratotheSETUPpositiontostartthesetupmode.InthePhotoorVideomode
presstheMENUbuttontocallupthemenu.AllmenuoptionsoftheT80Cameraand
possiblesettingvaluesfortherecordingmodearelistedbelow.Thestandardsettingis
alwayshighlightedinbold.
14