Need help?Do you have a question about the Campbell Sierra Wireless AirLink RV50 and is the answer not in the manual?
Covers obtaining and configuring cellular service for the modem.
Step-by-step guide for inserting the SIM card into the RV50(X) module.
Instructions for setting up the Konect PakBus Router service.
Configuration for modules using Konect PakBus Router with private dynamic IP.
Configuration steps for modules with a public static IP address.
Outlines the necessary base station setup for the RV50(X).
Lists required equipment for data logger site setup with the RV50(X).
Details how to connect the RV50(X) module for various communication methods.
Covers the necessary hardware and software for RV50(X) setup.
Describes the function and use of the RV50(X) module's ports.
Explains the meaning of different LED patterns for operation status.
How to interpret and check the cellular signal strength (RSSI).
Methods for rebooting the RV50(X) module.
Instructions for resetting the RV50(X) to its factory default configuration.
Information on how the RV50(X) enters and operates in recovery mode.
Details requirements and setup for Verizon Wireless service.
Details requirements and setup for AT&T wireless service.
FCC compliance information for North American users.
Information regarding radio frequency exposure limits and safety.
Compliance information for European Union regulations and CE marking.
Links to the official Declaration of Conformity documents.
Details the product's compliance with RoHS directives and exemptions.
To Next Page
General