EasyManua.ls Logo

Campbell Sierra Wireless AirLink RV50 - 7 Installation

Campbell Sierra Wireless AirLink RV50
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RF Connectors
l 3 SMA antenna connectors (primary, diversity & GPS)
l Active antenna support
Power
l Operating Voltage: 7 to 36 Vdc
l Typical Enable/Ignition Sense Line Low: 1 mA @ 12V
l Typical Idle: 65 to 95 mA @ 12V, depending on configuration
l Typical Active: 250 to 300 mA @ 12V, depending on configuration
Size
l Dimensions: 119 x 34 x 94 mm (4.69 x 1.34 x 3.7 in)
l Weight: 320 g (11.3 oz)
Environmental
l Operating Temperature Range: –30 to 70 °C (–22 to 158 °F)
l Storage Temperature: –40 to 85 °C (–40 to 185 °F)
l Humidity: 90% @ 60 °C
l Military Specification: MIL-STD-810G conformance to shock, vibration, thermal shock, and
humidity
l IP64 rated ingress protection
Industry Certifications
l Safety: IECEE Certification Bodies Scheme (CB Scheme), UL60950
l Vehicle Usage: E-Mark (UN ECE Regulation 10.04), ISO7637-2, SAE J1455 (Shock &
Vibration)
l Hazardous Environments: Class 1 Div 2
l Environmental: RoHS, REACH, WEEE
7. Installation
7.1 Base station requirements 26
7.2 Data logger site equipment 26
7.2.1 RV50(X) mounting kit 28
7.3 Wiring and connections 29
RV50(X) Sierra Wireless AirLink® 4G LTE Cellular Modem 25

Other manuals for Campbell Sierra Wireless AirLink RV50

Related product manuals