8.4 Rebooting the RV50(X)
There are two methods to reboot the RV50(X):
l On the RV50(X), press the Reset button for 1–5 seconds. (Release the button when the
Power LED flashes green.)
l In ACEmanager, click the Reboot button on the toolbar.
8.5 Reset the RV50(X) to factory default
settings
There are two methods to reset the RV50(X) to the factory default settings:
l On the RV50(X), press the Reset button for more than 5 seconds. (Release the button when
the Power LED flashes red.) Once the LEDs resume their normal operating behavior, the
reset is complete.
l In ACEmanager, go to Admin > Advanced and click the Reset to Factory Default button.
8.6 Recovery mode
If the RV50(X) fails to boot properly, it automatically enters recovery mode. If the RV50(X) is
unresponsive to ACEmanager input and AT commands, it can manually be put into recovery
RV50(X) Sierra Wireless AirLink® 4G LTE Cellular Modem 37
To Next Page
Loading...
