Appendix A. ACEManager and
template files
ACEmanager along with template files can be used to set up the RV50(X) in PPP or serial server
mode. To enable PPP mode, see Enabling PPP mode (p. 12).
ACEmanager is accessed via a web browser. For initial setup or troubleshooting with a direct
(cabled) connection, connect a standard Ethernet (RJ45) cable between the Ethernet port on the
computer and that on the module. Type http://192.168.13.31:9191 into a web browser.
Once the module is provisioned on the network, it may be accessed over the air by typing http://
followed by the IP address of the module, followed by the port :9191.
The first screen is a login (shown below). The default password is 12345. We strongly recommend
changing the default password to prevent unauthorized access and the potential of malware
infection. The password can be changed from the Admin tab.
RV50(X) Sierra Wireless AirLink® 4G LTE Cellular Modem 39
To Next Page
Loading...
