On the Network Services tab, in the PakBus/TCP Clients box, type the DNS address and Port
number noted during the Set up Konect PakBus Router (p. 6) step.
Apply to save your changes.
5.1.3 Set up LoggerNet
The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > IPPort.
2. Select PakBusPort and pbRouter for PakBus data loggers such as the CR1000X or CR300.
3. Add a data logger to the pbRouter.
RV50(X) Sierra Wireless AirLink® 4G LTE Cellular Modem 14
To Next Page
Loading...
