On the PPP tab select the Config/Port Used where the modem is connected. This is the same as
was selected on the Com Ports Settings tab. Set Modem Dial String to AT\APPP.
Apply to save your changes.
5.2.3 Set up LoggerNet
The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > IPPort.
2. Select PakBusPort
3. Add a data logger to the PakBusPort.
RV50(X) Sierra Wireless AirLink® 4G LTE Cellular Modem 21
To Next Page
Loading...
