Click the Template menu in the top right of the screen. When prompted for a template file name,
select RV50_115200.xml or RV50_9600.xml. The following screen shows the settings under the
Serial tab after the 115200 baud template file has been loaded.
Click on WAN/Cellular for the following screen:
Enter the APN as shown in the screen above. The example is for an APN = I2GOLD.
After the template file has been loaded, and the APN entered, click Apply to save the changes in
the module.
RV50(X) Sierra Wireless AirLink® 4G LTE Cellular Modem 41
To Next Page
Loading...
