CONTROLS/INSTRUMENTS
rmo2008-001-007_b
TO DECREASE SPEED
The throttleis spring loaded and should
return to idle when you release your
grip.
3) Clutch Lever (SM5 Model)
The clutch lever is in front of the left
handgrip. The clutch controls the
transmission of power from the en-
gine to the rear wheel. The lever is
squeezed in to disengage power and
eased out to engage power.
Refer to
LEARNING THE FRICTION
ZONE AND BASIC HANDLING
sub-
section for detailed instructions.
Clutch Lever Position Adjustment
The distance between the clutch lever
and handgrip can be adjusted. Adjust
clutch lever position as follows:
1. Hold the clutch lever forward.
2. Turn the adjuster dial to the desired
position.
rmo2008-001-020_a
CLUTCH LEVER ADJUSTMENT
1. Clutch lever
2. Adjuster dial
4) Gearshift Lever (SM5 Model)
The gearshift lever is in front of the left
footrest.
The gear pattern is Reverse-1-
Neutral-2-3-4-5.
rmo2008-001-009_a
Lift up or press down fully to move se-
quentially from one gear to the next.
When the lever is released, it returns
to center where the mechanism resets
for the next shift up or down. Neutral
(N) is selected by either a half lift from
first gear or a half press from second
gear. Refer to the
SHIFTING
subsec-
tion for detailed instructions.
Toshift into reverse, refer to the
OPER-
ATING IN REVERSE
subsection for de-
tailed instructions.
5) Gearshift Selector (SE5 Model)
The gearshift selector is below the left
handgrip.
rmo2008-004-401_a
1. Gearshift selector
Press selector forward to upshift. Pull
selector toward you to downshift.
12
______________
To Next Page
Loading...
Need help?
General
